int32 DAQmxCfgImplicitTiming (TaskHandle
taskHandle, int32 sampleMode, uInt64 sampsPerChanToAcquire);
Sets only the number of samples to acquire or
generate without specifying timing. Typically, you should use this
function when the task does not require sample timing, such as
tasks that use counters for buffered frequency measurement,
buffered period measurement, or pulse train generation. For finite
counter output tasks, sampsPerChanToAcquire is the
number of pulses to generate.
||The task used in this function.
||Specifies whether the task acquires or generates
samples continuously or if it acquires or generates a finite number
||Acquire or generate a finite number of samples.
||Acquire or generate samples until you stop the task.
||Acquire or generate samples continuously using hardware timing
without a buffer. Hardware
timed single point sample mode is supported only for the sample
clock and change detection timing types.
||The number of samples to acquire or generate for
each channel in the task if sampleMode is
sampleMode is DAQmx_Val_ContSamps, NI-DAQmx uses this value to
||The error code returned by the function in the
event of an error or warning. A value of 0 indicates success. A
positive value indicates a warning. A negative value indicates an